Session Banner - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Session Management Commands

session banner

Sets or resets the file name of the user–defined banner. The banner is a welcome banner that appears after
the user sucessfully logs onto the switch.
session {cli | ftp | http} banner file_name
no session {cli | ftp | http} banner
Syntax Definitions
cli
ftp
http
file_name
Defaults
•
A default banner is included in one of the switch's image files. It is automatically displayed at login so
no configuration is needed.
•
The user has the option of defining a custom supplementary banner or of using the default banner.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The no session banner command is used to disable a user defined session banner file from displaying
when you log onto the switch.
•
The session banner command is used to configure or modify the banner file name. You must use a
text editor to edit the file containing the banner text.
Examples
-> session cli banner /switch/banner.txt
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
Creates/modifies the CLI banner file name.
Creates/modifies the FTP banner file name.
Creates/modifies the HTTP banner file name.
Banner file name including the path from the switch's /flash directory.
The maximum length of the filename and path is 255 characters.
March 2011
session banner
page 41-5