Show Qos Qsi Stats - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

show qos qsi stats

Displays QSet instance (QSI) statistics.
show qos qsi [port slot/port[-port] | slot slot | linkagg agg_id[-agg_id]] [qi-id qi_id] stats
Syntax Definitions
slot/port[-port]
slot
agg_id[-agg_id]
qi-id
Defaults
By default, displays statistics for all QSet instances.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the port slot/port, slot slot, and linkagg agg_id parameters to display QSI statistics associated
with specific ports or link aggregates.
•
Use the qi-id qi_id parameter to display statistics for a specific queue instance. There are eight queues
associated with a single QSet instance.
Examples
-> show qos qsi port 1/1 stats
Port 1/1
QSAP: 1, Parent:
QSI 1
QSP: 1, Name:
WRP: 1, Name:
Scheduler: Qspec, Stats-Admin: Dis, Stats-Oper: Dis
BW
Admin (%): 100, Oper (Mbps):
Scheduler
Enqueued-Packets
Dequeued-Packets
Dropped-Packets
Green
Accepted-Packets
Discarded-Packets
Yellow
Accepted-Packets
Discarded-Packets
OmniSwitch CLI Reference Guide
A physical slot and port number. Use a hyphen to specify a range of
ports (1/5-10).
A slot number. Displays information for all ports on the slot.
The link aggregate ID number. Use a hyphen to specify a range of IDs
(10-15).
The queue instance (QI) ID number. The valid range is 1–8.
1, Admin: Ena
qsp-1, Type: Default,
wrp-1, Admin: Dis, Oper: Dis,
:
:
:
:
:
:
:
March 2011
0
100,
64,
816
720,
240
720,
240
show qos qsi stats
page 25-75