Policy Action Disposition - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Policy Commands

policy action disposition

Configures a disposition for a policy action.
policy action action_name disposition {accept | drop | deny}
policy action action_name no disposition
Syntax Definitions
action_name
accept
drop
deny
Defaults
parameter
accept | drop | deny
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove a disposition from an action.
Examples
-> policy action a3 disposition deny
-> policy action a3 no disposition
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply
policy action
show policy action
OmniSwitch CLI Reference Guide
The name of the action.
Specifies that the switch should accept the flow.
Specifies that the switch should silently drop the flow.
Specifies that the switch should drop the flow and issue an ICMP
message indicating the flow was dropped for administrative reasons.
Currently this option will provide the same result as drop; that is, the
flow is silently dropped.
default
accept
Applies configured QoS and policy settings to the current configuration.
Creates a policy action.
Displays information about policy actions.
March 2011
policy action disposition
page 26-119