Usb Auto-Copy - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

CMM Commands

usb auto-copy

Allows the image files from the USB device to be automatically copied to the switch immediately after the
USB device is connected.
usb auto-copy {enable | disable}
Syntax Definitions
N/A
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If the auto-copy is successful the switch will automatically reboot.
•
The USB device must contain the proper file structure and image files mentioned below and the USB
root directory must contain a signature file named aossignature. The aossignature file can be a blank
text file transferred to the switch.
•
This operation will enable all of the image files from the /uflash/10000/working directory to be copied
to the /flash/working directory.
•
If the auto-copy is successful, the auto-copy feature will be disabled before rebooting the switch and
must be re-enabled by the administrator for the next auto-copy process to execute. This will prevent
running the same auto-copy multiple times.
Examples
-> usb auto-copy enable
-> usb auto-copy disable
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
default
disable
March 2011
usb auto-copy
page 37-23