IP Multicast Switching Commands
show ipv6 multicast neighbor
Displays the MLD neighbor table entries of IPv6 Multicast Switching and Routing.
show ipv6 multicast neighbor
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ipv6 multicast neighbor
Total 2 Neighbors
Host Address
-------------------------+-----+-----+-------+------+-----
fe80::2a0:ccff:fed3:2853
::
output definitions
Host Address
VLAN
Port
Static
Count
Life
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 multicast max-group
OmniSwitch CLI Reference Guide
VLAN
Port
Static
1
2/1
no
1
2/13
yes
The IPv6 address of the IPv6 multicast neighbor.
The VLAN associated with the IPv6 multicast neighbor.
The slot and port number of the IPv6 multicast neighbor.
Whether it is a static MLD neighbor or not.
Displays the count of the IPv6 multicast neighbor.
The life time of the IPv6 multicast neighbor.
Creates a static MLD neighbor entry on a specified port on a specified
VLAN.
March 2011
show ipv6 multicast neighbor
Count
Life
1
6
0
0
page 21-113