Policy Condition Inner 802.1P - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

policy condition inner 802.1p

policy condition inner 802.1p
Configures an inner (customer) source 802.1p value for a policy condition. This condition applies to
double-tagged VLAN Stacking traffic and is used to classify such traffic based on the inner 802.1p bit
value.
policy condition condition_name inner 802.1p 802.1p_value
policy condition condition_name no inner 802.1p
Syntax Definitions
condition_name
802.1p_value
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to remove an 802.1p value for a condition; however, at least one clas-
sification parameter must be associated with a condition.
•
Policies that use the inner 802.1p condition are referred to as QoS VLAN Stacking policies. These are
separate policies from those configured through the VLAN Stacking Service application.
Examples
-> policy condition cond3 inner 802.1p 7
-> policy condition cond3 no inner 802.1p
Release History
Release 7.1.1; command was introduced.
page 26-104
The name of the condition. May be an existing condition name or a new
condition.
The inner 802.1p value of the inner 802.1Q VLAN tag (customer
VLAN) to match on double-tagged packets. Values range from 0
(lowest priority) to 7 (highest priority).
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011