Chapter 42 File Management Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

cd
cd
Changes the current working directory of the switch.
cd [path]
Syntax Definitions
path
Defaults
The default working directory of the switch is /flash.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Separate the multiple directory names that are part of the path with a slash (/).
Examples
-> cd
-> cd /flash/certified
Release History
Release 7.1.1; command introduced.
Related Commands
pwd
mkdir
rmdir
ls
rm
MIB Objects
systemServices
systemServicesWorkingDirectory
page 42-2
Specifies the path to the working directory. If no path is specified, the
current directory of the switch is changed to the higher directory level.
Displays the current working directory of the switch.
Creates a new directory.
Deletes an existing directory.
Displays the contents of a specified directory or the current working
directory.
Displays the contents of a specified directory or the current working
directory.
File Management Commands
OmniSwitch CLI Reference Guide March 2011