Show Qos Port - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

show qos port

Displays information about all QoS ports or a particular port.
show qos port [slot/port] [statistics]
Syntax Definitions
slot/port
statistics
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Information for all ports is displayed unless a particular port is specified.
•
Use the qos port command to configure port parameters.
•
For ports that are trusted (Yes displays in the Trust field), the Trust field includes one of the following
characters:
character definition
+ Indicates that the port is manually configured as trusted through the
port trusted
trust setting configured through the
* Indicates that the port is automatically trusted regardless of the global set-
ting set through the
ports configured for 802.1Q.)
Examples
-> show qos port
Slot/
Port Active Trust P/DSCP Classification
1/1 No No
1/2 Yes No
1/3 No No
1/4 No No
1/5 No No
1/6 No No
1/7 No No
1/8 No No
1/9 No No
1/10 No No
1/11 No *Yes
1/12 No *Yes
OmniSwitch CLI Reference Guide
The physical slot and port number. For example: 3/1.
Displays statistics for high-density gigabit modules.
command; the port setting takes precedence over the global
qos trust ports
Default Default
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 DSCP
0/ 0 *802.1P
0/ 0 *802.1P
March 2011
qos trust ports command.
command. (Applies to mobile ports and
Bandwidth
Physical Ingress Egress
0K -
1.00G -
0K -
0K -
0K -
0K -
0K -
0K -
0K -
0K 50K
0K -
0K -
show qos port
qos
Type
- ethernet
- ethernet-1G
- ethernet
- ethernet
- ethernet
- ethernet
- ethernet
- ethernet
- ethernet
- ethernet
- ethernet
- ethernet
page 25-53