powersupply enable
powersupply enable
Enables the power supply unit identified by the PSU-ID.
powersupply enable [slot]
no powersupply enable [slot]
Syntax Definitions
slot
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
N/A
Release History
Release 7.1.1; command introduced.
Related Commands
power slot
page 38-16
Slot number of power supply.
Turns the power on or off for a specified Network Interface (NI)
module.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide
March 2011