ntp authenticate
ntp authenticate
Enables or disables the authentication on a configured NTP server.
ntp authenticate {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, NTP authentication is disabled.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use this command to enable or disable authentication for NTP server.
•
Before NTP authentication is enabled, NTP operation should be enabled by using
•
Before enabling the NTP operation, NTP server must be specified using the
Examples
-> ntp authenticate enable
-> ntp authenticate disable
Release History
Release 7.1.1; command was introduced.
Related Commands
show ntp status
MIB Objects
alaNtpAuthenticate
page 40-14
Enables authentication for NTP server.
Disables authentication for NTP server.
Displays the information about the current NTP status.
Network Time Protocol Commands
ntp client
ntp server
OmniSwitch CLI Reference Guide
command.
command.
March 2011