ip dvmrp report-interval
ip dvmrp report-interval
Configures the route report interval. This value defines how often the switch will send its complete rout-
ing table to neighboring routers running DVMRP.
ip dvmrp report-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp report-interval 60
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip dvmrp route
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpRouteReportInterval
page 22-12
Specifies the report interval, in seconds (10–2000).
default
60
Displays the DVMRP routes that are being advertised to other rout-
ers.
Displays the global DVMRP parameters.
OmniSwitch CLI Reference Guide
DVMRP Commands
March 2011