Show Qos Qsi - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

show qos qsi

Displays the QSet instance (QSI) configuration for the switch. A QSI is a logical set of eight virtual output
queues (VOQs) associated with each port and link aggregate (LAG) ID.
show qos qsi [port slot/port[-port] | slot slot | linkagg agg_id[-agg_id]] [detail]
Syntax Definitions
slot/port[-port]
slot
agg_id[-agg_id]
detail
Defaults
By default, displays the entire QSI configuration for the switch.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the port slot/port, slot slot, and linkagg agg_id parameters to display the QSI information associ-
ated with specific ports or link aggregates.
•
Use the detail parameter to display additional profile information, such as the profile configuration
associated with queues and ports.
Examples
-> show qos qsi port 1/1
Port 1/1
QSAP: 1, Parent:
QSI 1
QSP: 1, Name:
WRP: 1, Name:
Scheduler: Qspec, Stats-Admin: Dis, Stats-Oper: Dis
BW
Admin (%): 100, Oper (Mbps):
-> show qos qsi port 1/1 detail
Port 1/1
QSAP: 1, Parent:
QSI 1
QSP: 1, Name:
WRP: 1, Name:
Scheduler: Qspec, Stats-Admin: Dis, Stats-Oper: Dis
BW
Admin (%): 100, Oper (Mbps):
OmniSwitch CLI Reference Guide
A physical slot and port number. Use a hyphen to specify a range of
ports (1/5-10).
A slot number. Displays information for all ports on the slot.
The link aggregate ID. Use a hyphen to specify a range of IDs (10-15).
Displays additional queue information for the instance.
1, Admin: Ena
qsp-1, Type: Default,
wrp-1, Admin: Dis, Oper: Dis,
1, Admin: Ena
qsp-1, Type: Default,
wrp-1, Admin: Dis, Oper: Dis,
March 2011
0
0
show qos qsi
page 25-71