Show Ip Mroute-Boundary - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Multicast Routing Commands

show ip mroute-boundary

Displays scoped multicast address boundaries for the switch's router interfaces.
show ip mroute-boundary
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ip mroute-boundary
Interface Name
--------------+------------------+------------------
vlan-4
output definitions
Interface Name
Interface Address
Boundary Address
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
Interface Address Boundary Address
214.0.0.7
The name of the interface on which the boundary is assigned. Packets
with a destination address in the associated address/mask range will not
be forwarded from this interface.
The IP address of this interface where the boundary is assigned.
The scoped multicast address that, when combined with the boundary
mask, identifies the scoped boundary range. The boundary's subnet
mask is shown using the CIDR prefix length: 255.0.0.0 equals /8;
255.255.0.0 equals /16; 255.255.255.0 equals /24.
March 2011
239.1.1.1/32
show ip mroute-boundary
page 24-7