Ip Multicast Proxying - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IP Multicast Switching Commands

ip multicast proxying

Enables or disables IGMP proxying on the specified VLAN or on the system if no VLAN is specified.
ip multicast [vlan vid] proxying [enable | disable]
Syntax Definitions
vid
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If the IGMP proxying is already enabled on the system, then the VLAN configuration will override the
system's configuration.
•
IGMP proxying refers to processing membership information on behalf of client systems and reporting
membership on their behalf.
•
You can also restore the IGMP querying to its default (i.e., disabled) setting on the system if no VLAN
is specified, by using only ip multicast proxying (e.g., ip multicast proxying).
•
You can also restore the IGMP querying to its default (i.e., disabled) setting on the specified VLAN,
by using only ip multicast vlan vid proxying (e.g., ip multicast vlan 2 proxying).
Examples
-> ip multicast proxying enable
-> ip multicast proxying disable
-> ip multicast proxying
-> ip multicast vlan 2 proxying enable
-> ip multicast vlan 2 proxying disable
-> ip multicast vlan 2 proxying
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
VLAN on which to apply the configuration.
Enable IGMP proxying.
Disable IGMP proxying.
default
disable
March 2011
ip multicast proxying
page 21-41