System Time - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Chassis Management and Monitoring Commands

system time

Displays or modifies the switch's current system time.
system time [hh:mm:ss]
Syntax Definitions
hh:mm:ss
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify a new system time in the command line, the current system time will be displayed.
Examples
-> system time 14:30:00
-> system time
14:30:08
Release History
Release 7.1.1; command introduced.
Related Commands
system date
system timezone
MIB Objects
systemServices
systemServicesTime
OmniSwitch CLI Reference Guide
The new time being specified for the system. To set this value, enter the
current time in 24-hour format, where hh is the hour, mm is the minutes,
and ss is the seconds. For example, 14:30:00.
Displays or modifies the current system date on the switch.
Displays or modifies the time zone for the switch.
March 2011
system time
page 38-7