Bgp Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Omniswitch series
Table of Contents

Advertisement

CLI Change Guidelines
AOS Release 6
ip bfd-std interface interface_name mode {echo-only
| demand [echo {enable | disable}] | asynchronous
[echo {enable|disable}}
ip bfd-std interface interface_name 12-hold-timer l2-
holdtimer-interval
ip ospf bfd-std status {enable | disable}
[no] ip ospf bfd-std all-interfaces
ip ospf interface interface-name bfd-std {enable | dis-
able}
ip ospf interface interface-name bfd-std drs-only
ip ospf interface interface-name bfd-std all-nbrs
ip bgp bfd-std status {enable | disable}
[no] ip bgp bfd-std all-neighbors
ip bgp neighbor name bfd-std {enable | disable}
vrrp bfd-std {enable | disable}
vrrp track num address address bfd-std {enable| dis-
able}
show ip bfd-std
show ip bfd-std interfaces [interface-name]
show ip bfd-std [session <num> ] [sessions [slot
<num>]
n/a
n/a
n/a

BGP Commands

AOS Release 6
ip bgp status {enable | disable}
ip bgp network network_address ip_mask sta-
tus {enable | disable}
ip bgp neighbor ip_address status {enable |
disable}
ipv6 bgp neighbor ipv6_address [status
{enable | disable}]
OmniSwitch CLI Reference Guide
AOS Release 7
ip bgp admin-state {enable | disable}
ip bgp network <network_address> <ip_mask> admin-
state {enable | disable}
ip bgp neighbor <ip_address> admin-state {enable | dis-
able}
ipv6 bgp neighbor <ipv6_address> [admin-state {enable |
disable}]
March 2011
AOS Release 6 to AOS Release 7
AOS Release 7
ip bfd interface interface_name mode {echo-only |
demand [echo-state {enable | disable}] | asynchro-
nous [echo-state {enable | disable}]}
ip bfd interface interface_name 12-hold-timer l2-
holdtimer-interval
ip ospf bfd-state {enable | disable}
ip ospf bfd-state all-interfaces {enable | disable}
ip ospf interface interface-name bfd-state {enable |
disable}
ip ospf interface interface-name bfd-state drs-only
ip ospf interface interface-name bfd-state all-
neighbors {enable | disable}
ip bgp bfd-state {enable | disable}
ip bgp bfd-state all-neighbors {enable | disable}
ip bgp neighbor ip_address bfd-state {enable | dis-
able}
vrrp bfd-state {enable | disable}
vrrp track num address address bfd-state {enable|
disable}
show ip bfd
show ip bfd interfaces [if-name]
show ip bfd sessions [session_num] [slot slot_num]
ip bfd multiplier num
show ip bfd sessions statistics session_num
ip static-route ipv4_prefix/pfx_length gateway
ipv4_host_address bfd-state {enable| disable}
page B-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 10k

Table of Contents