Reload Secondary - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

reload secondary

reload secondary
Reloads the secondary CMM from the certified directory.
reload secondary [in [hours:] minutes | at hour:minute [month day | day month]]
reload secondary cancel
Syntax Definitions
in [hours:] minutes
at hour:minute
month day | day month
cancel
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Can be issued from both primary or secondary CMM.
•
Reloads the secondary CMM only, the Primary CMM remains operational.
Examples
-> reload secondary
-> reload secondary in 15:25
-> reload secondary at 15:25 august 10
-> reload secondary at 15:25 10 august
Release History
Release 7.1.1; command introduced.
page 37-2
Optional syntax. Schedules a reload of the software to take effect in the
time. The time can be specified in minutes or hours and minutes within
the next 24 hours.
Optional syntax. Schedules a reload of the software to take place at the
specified time using a 24-hour clock. If you do not specify the month
and day, the reload takes place at the specified time on the current day
provided the specified time is later than the time when the CLI
command is issued. If the specified time is earlier than the current time,
the reload takes place on the following day.
The name of the month and the number of the day for the scheduled
reload. Specify a month name and the day number. See examples below
for further explanation.
Cancels a pending time delayed reboot.
OmniSwitch CLI Reference Guide
CMM Commands
March 2011