Webview Force-Ssl - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

webview force-ssl

webview force-ssl
Enables/disables Force SSL on the switch. SSL is a protocol that establishes and maintains secure commu-
nication between SSL-enabled servers and clients.
webview force-ssl enable
webview force-ssl disable
Syntax Definitions
enable | disable
Defaults
parameter
Force SSL
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The switch contains a self-signed certificate that may prompt a certificate warning.
Examples
-> webview force-ssl enable
-> webview force-ssl disable
Release 7.1.1; command was introduced.
Related Commands
webview access
show webview
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaInd1WebMgtSsl
page 43-4
Enabling this feature forces the user to use ssl to access the switch when
using WebView.
default
Enabled
Enables/disables webview access on the switch.
Displays web management configuration information.
Web Management Commands
OmniSwitch CLI Reference Guide March 2011