Show Policy Rule - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show policy rule

show policy rule
Displays information about pending and applied policy rules.
show [applied] [bridged | routed | multicast] policy rule [rule_name]
Syntax Definitions
applied
bridged
routed
multicast
rule_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Information for all rules is displayed unless rule_name is specified.
•
Information for all rule types is displayed unless a keyword (bridged, routed, multicast) is specified.
•
Use the show active policy rule
on the switch.
Examples
-> show policy rule
Rule name
Condition name
Action name
Rule name
State
Condition name
Action name
Rule name
State
Condition name
Action name
page 26-170
Indicates that only policy rules that have been applied should be
displayed.
Displays rules that apply to bridged traffic.
Displays rules that apply to routed traffic.
Displays rules that apply to multicast traffic.
The name of the rule for which you want to display information; or a
wildcard sequence of characters for displaying information about rules
with similar names. Use an asterisk (*) to indicate a wildcard character.
command to display only active rules that are currently being enforced
: r1
= c1,
= a1
: r2
= new,
= c2,
= a1
: r3
= new,
= c2,
= a2
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011