Qos Port Maximum Depth - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

qos port maximum depth

qos port maximum depth
Configures the maximum bucket size used for traffic metering. The bucket size determines how much the
traffic can burst over the maximum bandwidth rate.
qos port slot/port[-port] maximum depth bps[k | m | g | t]
qos port slot/port[-port] no maximum depth
Syntax Definitions
slot/port[-port]
bps[k | m | g | t]
Defaults
parameter
k | m | g | t
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This QoS port parameter is configured in conjucntion with the maximum bandwidth parameters. When
the bucket size is reached, the switch starts to drop packets.
•
Use the no form of the command to remove the maximum depth setting from a port.
•
If the maximum depth value is specified as an integer, without an abbreviated unit designation, the
value is applied in kbps by default. For example, if the number 10 is specified, 10K is the maximum
depth value used. However, if 10G is specified, the maximum depth value applied is 10 gbps.
•
Modifying the maximum depth is most useful for low-bandwidth links.
Examples
-> qos port 3/1 maximum depth 100
-> qos port 4/1-8 maximum depth 10m
-> qos port 3/1 no maximum depth
-> qos port 4/1-8 no maximum depth
Release History
Release 7.1.1; command was introduced.
page 25-38
The slot number and port number of the physical port. Use a hyphen to
specify a range of ports (4/1-8).
The maximum bucket size, in bits-per-second. The value may be entered
as an integer (for example, 10) or with abbreviated units (for example,
10k, 5m, 1g).
default
k
OmniSwitch CLI Reference Guide
QoS Commands
March 2011