Ip Dvmrp Prune-Timeout - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

DVMRP Commands

ip dvmrp prune-timeout

Configures the prune packet retransmission value. This value is the duration of time that the routing
switch will wait if it continues to receive unwanted multicast traffic before retransmitting a prune
message.
ip dvmrp prune-timeout seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp prune-timeout 30
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp prune-lifetime
show ip dvmrp prune
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpPruneRetransmission
OmniSwitch CLI Reference Guide
Specifies retransmission time, in seconds (30–86400).
default
30
Indicates the length of time a prune will be in effect.
Displays DVMRP prune entries, including the router's upstream
prune state.
Displays the global DVMRP parameters.
March 2011
ip dvmrp prune-timeout
page 22-11