Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1629

QoS Commands
-> show qos qset qsp-id 1 detail slot 1
Legends: T (Type): D = Default, C = Custom
QSAP
Port
------------------+----+-----+--+----------+------+-----+----+------+---------+-
1/1
1/2
1/3
1/4
1/5
1/6
1/7
1/8
1/9
1/10
.
.
.
output definitions
QSAP Port
QSAP Type
dQSI
ID
Name
QSAP Parent
Admin
Oper
BW (%) Admin
BW (Mbps)Oper
Type
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
QSAP
Type dQSI ID Name
Phy 1 1 qsp-1
Phy 2 1 qsp-1
Phy 3 1 qsp-1
Phy 4 1 qsp-1
Phy 5 1 qsp-1
Phy 6 1 qsp-1
Phy 7 1 qsp-1
Phy 8 1 qsp-1
Phy 9 1 qsp-1
Phy 10 1 qsp-1
The port number or link aggregate ID for the QSet attachment point
(QSAP). A QSAP is a logical entity generated internally by the switch
to identify the association between a QSet instance and a port or link
aggregate. The QSAP is not configurable at this time.
The type of QSAP port; Phy = physical (slot/port), Log = logical (link-
agg ID).
The default QSet instance (dQSI) ID number. This number is generated
internally by the switch to identify the QSI that is automatically
assigned to each port and link aggregate.
The QSet profile (QSP) ID number.
The QSP name.
The QSAP parent ID number.
The administrative state of the QSet.
The operational state of the QSet.
The administrative bandwidth percentage for the QSet. The admin per-
centage is not configurable at this time.
The operational bandwidth value, which is based on port speed.
Whether the QSet profile is a default profile (D = default templates 1–
4) or a custom profile (C = user-configured 5–8). Configuring a custom
profile is not supported at this time.
March 2011
QSAP BW (%) BW (Mbps)
Parent Admin Oper Admin
1 Ena Dis 100
2 Ena Dis 100
3 Ena Dis 100
4 Ena Dis 100
5 Ena Dis 100
6 Ena Dis 100
7 Ena Dis 100
8 Ena Dis 100
9 Ena Dis 100
10 Ena Dis 100
show qos qset
Oper T
0 D
0 D
0 D
0 D
0 D
0 D
0 D
0 D
0 D
0 D
page 25-69