Aaa Accounting Command - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

AAA Commands

aaa accounting command

Enables or disables the server for command accounting. Accounting servers keep track of network
resources (time, packets, bytes, etc.) and user activity.
aaa accounting command server1 [server2...] [local]
no accounting command
Syntax Definitions
server1
server2...
local
Defaults
Accounting is disabled by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of the command to disable command accounting.
•
Up to 4 accounting servers (total) may be specified. At least one server is required. Each server name
should be separated by a space.
•
The servers can be only TACACS+ servers.
•
The switch uses only the first available server in the list for accounting. For example, if server1 is not
available, the switch will use server2.
•
TACACS+ server may each have an additional backup specified through the
command.
Examples
-> aaa accounting command tacacs1 tacacs2 tacacs3
-> no aaa accounting command
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
The name of the TACACS+ server used for command accounting. At
least one server is required. TACACS+ server names are set up through
the aaa tacacs+-server
The names of TACACS+ backup servers. Up to 3 backups may be spec-
ified; each server name should be separated by a space. These backups
are only used if server1 becomes unavailable. They are polled in the
order they are listed in this command. The first available server
becomes the accounting server.
Local accounting is done through the Switching Logging feature on the
switch.
March 2011
aaa accounting command
commands.
aaa tacacs+-server
page 28-17