Configuration File Manager Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

The Configuration Manager feature allows you to configure your switch using an ASCII-based text file.
CLI commands may be typed into a text document—referred to as a configuration file—and then uploaded
and applied to the switch.
MIB information for the Configuration Manager commands is as follows:
Filename: AlcatelIND1System.mib
Module: Alcatel-IND1ConfigMgr.mib
A summary of the available commands is listed here:
configuration apply
configuration error-file-limit
show configuration status
configuration cancel
configuration syntax-check
configuration snapshot
show configuration snapshot
write terminal
OmniSwitch CLI Reference Guide
44 Configuration File
Manager Commands
March 2011 page 44-1