Policy Condition Source Vlan - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

policy condition source VLAN

policy condition source VLAN
Configures a source VLAN for a policy condition.
policy condition condition_name source vlan vlan_id
policy condition condition_name no source vlan
Syntax Definitions
condition_name
vlan_id
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of the command to remove a source VLAN from a policy condition; however, at least one
classification parameter must be associated with a condition.
Examples
-> policy condition cond5 source vlan 3
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply
policy condition
show policy condition
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionSourceVlan
alaQoSAppliedConditionTable
alaQoSAppliedConditionName
alaQoSAppliedConditionSourceVlan
page 26-98
The name of the condition. May be an existing condition name or a new
condition.
The source VLAN ID for the flow.
Applies configured QoS and policy settings to the current configuration.
Creates a policy condition.
Shows information about policy conditions configured on the switch.
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011