Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1834

aaa radius-server
Usage Guidelines
•
A host name (or IP address) and a secret are required when configuring a server.
•
The server and the backup server must both be RADIUS servers.
•
Use the no form of the command to remove a RADIUS server from the configuration. Only one server
may be deleted at a time.
Examples
-> aaa radius-server pubs2 host 10.10.2.1 key wwwtoe timeout 5
-> no aaa radius-server pubs2
Release History
Release 7.1.1; command was introduced.
Related Commands
show aaa server
aaa authentication
aaa accounting session
MIB Objects
aaaServerTable
aaasProtocol
aaasHostName
aaasIpAddress
aaasHostName2
aaasIpAddress2
aaasRadKey
aaasRetries
aaasTimout
aaasRadAuthPort
aaasRadAcctPort
page 28-4
Displays information about AAA servers.
Specifies the AAA servers to be used for Authenticated Switch
Access.
Specifies the accounting servers to be used for Authenticated
Switch Access.
OmniSwitch CLI Reference Guide
AAA Commands
March 2011