Chassis Management and Monitoring Commands
reload slot
Reloads (i.e., reboots) a specified Network Interface (NI) module.
reload slot slot
Syntax Definitions
slot
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The reload slot command reboots only the specified NI. Other modules installed on the chassis,
including primary and secondary CMMs, are not affected
Examples
-> reload slot 2
Release History
Release 7.1.1; command introduced.
Related Commands
reload slot
power slot
show slot
MIB Objects
chasEntPhysicalTable
chasEntPhysAdminStatus
reset
OmniSwitch CLI Reference Guide
Specifies the slot number.
Reloads the specified NI module.
Turns the power on or off for a specified Network Interface (NI)
module.
Shows the hardware information and the current status for Network
Interface (NI) modules currently running in the chassis.
March 2011
reload slot
page 38-13