Ethernet-Service Sap-Profile - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ethernet-service sap-profile

ethernet-service sap-profile
Creates a profile for a VLAN Stacking Service Access Point (SAP). Profile attributes are used to define
traffic engineering policies that are applied to traffic serviced by the SAP.
ethernet-service sap-profile sap_profile_name [bandwidth not-assigned] [[shared | not-shared]
ingress-bandwidth mbps ] [cvlan-tag {preserve | translate}] priority [not-assigned |
map-inner-to-outer-p | map-dscp-to-outer-p | fixed value][egress-bandwidth mbps]
no ethernet-service sap-profile sap_profile_name
Syntax Definitions
sap_profile_name
bandwidth not-assigned
shared
not shared
ingress bandwidth mbps
preserve
translate
priority not-assigned
map-inner-to-outer-p
map-dscp-to-outer-p
fixed value
egress-bandwidth mbps
page 34-18
An alphanumeric string. Use quotes around string if the profile name
contains multiple words with spaces between them (for example,
"Alcatel-Lucent Engineering").
Specifies that the SAP profile does not allocate switch resources to
enforce bandwidth requirements. Applies only when the profile
specifies the default ingress bandwidth value (zero).
Shares the ingress bandwidth limit across all SAP ports and CVLANs.
Applies the ingress bandwidth limit to individual SAP ports and
CVLANs; bandwidth is not shared.
The maximum amount of bandwidth to be allowed for SAP ports, for
the incoming traffic, in megabits per second. This parameter can be used
only along with the shared option or not-shared option.
Retains the customer VLAN ID (inner tag) and double tags the frame
with the SVLAN ID (outer tag).
Replaces the customer VLAN ID with the SVLAN ID.
Specifies that the SAP profile is not assigned with a priority value or
priority mapping.
Maps the customer VLAN (inner tag) priority bit value to the SVLAN
(outer tag) priority bit value.
Maps the customer VLAN (inner tag) DSCP value to the SVLAN (outer
tag) priority bit value.
Sets the SVLAN (outer tag) priority bit to the specified value.
The maximum amount of bandwidth to be allowed for SAP ports, for
the outgoing traffic, in megabits per second.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide March 2011