Ssh Enforce-Pubkey-Auth - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ssh enforce-pubkey-auth

ssh enforce-pubkey-auth
Enables or disables Secure Shell public key and password authentication. When enabled, password authen-
tication is not allowed.
ssh enforce-pubkey-auth {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ssh enforce-pubkey-auth enable
Release History
Release 7.1.1; command was introduced.
Related Commands
telnet
MIB Objects
alaSshConfigGroup
alaSshPubKeyEnforceAdminStatus
page 41-32
Enforces only SSH public key authentication.
Enforces both SSH public key and password authentication.
default
disable
Invokes a Telnet session. A Telnet session is used to connect to a remote
system or device.
Session Management Commands
OmniSwitch CLI Reference Guide March 2011