Ip Dvmrp Flash-Interval - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip dvmrp flash-interval

ip dvmrp flash-interval
Configures the minimum flash update interval value. The flash update interval defines how often routing
table change messages are sent to neighboring DVMRP routers.
ip dvmrp flash-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Because routing table change messages are sent between the transmission of complete routing tables, the
flash update interval value must be lower than the route report interval.
Examples
-> ip dvmrp flash-interval 5
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpFlashUpdateInterval
page 22-4
Specifies the interval value, in seconds (5–86400).
default
5
Displays global DVMRP parameters.
OmniSwitch CLI Reference Guide
DVMRP Commands
March 2011