DVMRP Commands
ip dvmrp interface metric
Configures the distance metric for an interface, which is used to calculate distance vectors. DVMRP uses
the distance metric value to determine the most cost-effective way to pass data through the network.
ip dvmrp interface {interface_name} metric value
Syntax Definitions
interface_name
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
DVMRP uses the distance metric value to determine the most cost-effective way to pass data through the
network. The higher the distance metric value, the higher the cost.
Examples
-> ip dvmrp interface vlan-2 metric 1
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp interface
show ip dvmrp interface
MIB Objects
dvmrpInterfaceTable
dvmrpInterfaceLocalAddress
dvmrpInterfaceMetric
OmniSwitch CLI Reference Guide
The name of the interface.
Specifies the metric value (1–31).
default
1
Enables or disables the DVMRP protocol on a specified interface.
Displays the DVMRP interface table.
March 2011
ip dvmrp interface metric
page 22-7