Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1819

Policy Server Commands
Defaults
parameter
admin
port_number
preference
ssl | no ssl
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you change the port number, another entry is added to the policy server table; the existing port number
is not changed. To remove a port number, use the no form of this command with the relevant policy server
IP address and the port number you want to remove.
Examples
-> policy server 222.22.22.2 port 345 user dirmgr password secret88 searchbase
ou=qos,o=company,c=country
Release History
Release 7.1.1; command introduced.
Related Commands
show policy server
MIB Objects
DIRECTORYSERVERTABLE
directoryServerAddress
directoryServerPort
directoryServerAdminStatus
directoryServerPreference
directoryServerUserId
directoryServerAuthenticationType
directoryServerPassword
directoryServerSearchbase
directoryServerEnableSSL
OmniSwitch CLI Reference Guide
default
up
389 (SSL disabled)
636 (SSL enabled)
0
no ssl
Displays information about policies downloaded from an LDAP server.
March 2011
policy server
page 27-5