QoS Commands
qos reset
Resets the QoS configuration to its defaults.
qos reset
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command to reset QoS configuration that has not yet been applied through the qos apply
command. The parameters are reset to their defaults.
Examples
-> qos reset
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply
qos revert
MIB Objects
alaQoSConfigTable
alaQoSConfigReset
OmniSwitch CLI Reference Guide
Applies all QoS settings configured on the switch to the current configu-
ration.
Deletes any QoS configuration that has not been applied to the configu-
ration through the qos apply command.
March 2011
qos reset
page 25-27