Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1656

policy mac group
from {cli | ldap | blt}
This syntax indicates how the map group was created. The cli and ldap options may be changed by a
user modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in object, this setting is not configurable.
Examples
-> policy mac group mac_group1 00:20:da:05:f6:23 00:20:da:05:f6:24
-> no policy mac group mac_group1
Release History
Release 7.1.1; command was introduced.
Related Commands
policy condition
qos apply
show policy mac group
MIB Objects
alaQoSMACGroupsTable
alaQoSMACGroupsName
alaQoSMACGroupsSource
alaQoSAppliedMACGroupsTable
alaQoSAppliedMACGroupsName
alaQoSAppliedMACGroupsSource
alaQoSMACGroupTable
alaQoSMACGroupMacAddr
alaQoSMACGroupMacMask
alaQoSAppliedMACGroupTable
alaQoSAppliedMACGroupMacAddr
alaQoSAppliedMACGroupMacMask
page 26-16
Configures a policy condition. A MAC group may be configured as part
of a policy condition.
Applies configured QoS and policy settings to the current configuration.
Displays information about policy MAC groups.
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011