session login-timeout
session login-timeout
Sets or resets the amount of time the user can take to accomplish a successful login to the switch. If the
timeout period is exceeded, the TCP connection is closed by the switch.
session login-timeout seconds
Syntax Definitions
seconds
Defaults
Login timeout default is 55 seconds.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> session login-timeout 30
Release History
Release 7.1.1; command was introduced.
Related Commands
show session config
session login-attempt
session timeout
MIB Objects
sessionMgr
sessionLoginTimeout
page 41-4
The number of seconds the switch allows for the user to accomplish a
successful login. Valid range is from 5 to 600 seconds.
Displays Session Manager information such as banner file name,
session timeout value, default prompt value, login timer, and login
attempt number.
Sets or resets the number of times a user can attempt unsuccessfully
to log into the switch before the TCP connection is closed.
Configures the inactivity timer for a CLI, HTTP (including Web-
View), or FTP interface. When the switch detects no user activity
for this period of time, the user is logged off the switch.
Session Management Commands
OmniSwitch CLI Reference Guide
March 2011