Takeover - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

takeover

takeover
Forces the current secondary CMM to assume the role of the primary CMM.
takeover
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command causes the secondary CMM to take over the functions of the primary CMM. After this
command, the old primary CMM is the new secondary CMM.
•
Be sure that the secondary CMM has all software (i.e., image and configuration files) required to
continue CMM operations, before issuing the takeover command.
•
For information on synchronizing the primary and secondary CMM software before issuing the
takeover command, see the
Examples
-> takeover
Release History
Release 7.1.1; command introduced.
Related Command
reload all
MIB Objects
chasEntPhysicalTable
chasEntPhysAdminStatus
page 37-16
copy flash-synchro command.
Reboots the switch.
OmniSwitch CLI Reference Guide
CMM Commands
March 2011