Show Cmm - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Chassis Management and Monitoring Commands

show cmm

Displays basic hardware and status information for the CMM modules in a standalone switch.
show cmm [slot]
Syntax Definitions
slot
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
On chassis-based switches, a CMM installed in the left CMM slot position is defined as CMM-A. A
CMM installed in the right position is CMM-B.
-> show cmm 1
Module in slot CMM-A
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
FPGA Physical-1
Admin Status:
Operational Status:
Power Consumption:
CPU Model
MAC Address:
output definitions
Model Name
Description
Part Number
Hardware Revision
Serial Number
Manufacture Date
FPGA Physical-1
OmniSwitch CLI Reference Guide
Specifies the CMM by slot number or letter.
OS10K,
CMM,
902271-10,
002,
E23L9059,
JUN 08 2004,
December 24 2009,
POWER ON,
UP,
888,
MPC8572 Motorola,
00:d0:95:a3:e5:09,
The model name of the switch. Note that on chassis-based switches,
CMM modules are made up of two major subcomponents: the fabric
board and the processor board. Fabric boards are denoted as OS10*00-
CMM and processor boards are denoted as CMM-PROC. Information
for each board is displayed separately.
A factory-defined description of the associated board (e.g., BBUS
Bridge or PROCESSOR).
The Alcatel-Lucent part number for the board.
The hardware revision level for the board.
The Alcatel-Lucent serial number for the board.
The date the board was manufactured.
FPGA version.
March 2011
show cmm
page 38-23