DVMRP Commands
ip dvmrp route-holddown
Configures the time during which DVMRP routes are kept in a hold down state. A holddown state refers
to the time that a route to an inactive network continues to be advertised.
ip dvmrp route-holddown seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp route-holddown 120
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp route-timeout
show ip dvmrp
show ip dvmrp route
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpRouteHoldDown
OmniSwitch CLI Reference Guide
Specifies the holddown time, in seconds (1–86400).
default
120
Configures the route expiration timeout value.
Displays the global DVMRP parameters.
Displays the DVMRP routes that are being advertised to other
routers.
March 2011
ip dvmrp route-holddown
page 22-13