Show Ip Slb Clusters - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Omniswitch series
Table of Contents

Advertisement

Server Load Balancing Commands

show ip slb clusters

Displays the status and basic configuration for all Server Load Balancing (SLB) clusters on a switch. This
command also displays traffic statistics for QoS policy condition clusters.
show ip slb clusters [statistics]
Syntax Definitions
statistics
Defaults
By default, the status and basic configuration for all clusters is displayed; statistics are not shown.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the statistics parameter to display the total number of packets that were passed to clusters because
they met the QoS condition criteria configured for that cluster. The polling interval used to obtain such
statistics is every 15 minutes. See the second example below.
Examples
-> show ip slb clusters
Cluster Name
----------------+----------------+--------+-------------------+-----+---------
WorldWideWeb
Intranet
FileTransfer
Output fields are described here:
output definitions
Cluster Name
VIP/COND
Admin Status
Operational Status
# Srv
% Avail
OmniSwitch CLI Reference Guide
Displays SLB statistics for QoS policy condition clusters.
Admin
VIP/COND
Status
128.241.130.204 Enabled
128.241.130.205 Enabled
128.241.130.206 Enabled
The name of the SLB cluster.
The virtual IP (VIP) address or the policy condition name for the SLB
cluster.
The administrative status of the SLB cluster (Enabled or Disabled).
The operational status of the SLB cluster; In Service (at least one
physical server is operational in the cluster) or Out of Service.
The total number of physical servers that belong to the SLB cluster.
The percentage of time that the physical server has been available for
processing client requests. In other words, the actual ratio of up time
(In Service plus Retrying) versus down time (No Answer plus Link
Down). Please note that the Disabled and the initial Discovery states
are not counted as down time.
March 2011
Operational
Status
In Service
In Service
Out of Service
show ip slb clusters
#
%
Srv
Avail
3
95
2
100
2
50
page 20-35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 10k

Table of Contents