show ip slb cluster
show ip slb cluster
Displays detailed statistics and configuration information and operational status for a single Server Load
Balancing (SLB) cluster. This command also displays traffic statistics for single QoS policy condition
cluster.
show ip slb cluster name [statistics]
Syntax Definitions
name
statistics
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the statistics parameter to display the total number of packets that were passed to the cluster because
they met the QoS condition criteria configured for that cluster. The polling interval used to obtain such
statistics is every 15 minutes. See the second example below:
Examples
-> show ip slb cluster Intranet
Cluster Intranet
VIP
Type
Admin status
Operational status
Ping period (seconds)
Ping timeout (milliseconds)
Ping retries
Probe
Number of packets
Number of servers
Server 128.241.130.107
Admin status = Enabled, Operational status = In Service,
Weight = 4, Availability (%) =
Server 128.241.130.117
Admin status = Enabled, Operational status = Discovery,
Weight = 6, Availability (%) =
Server 128.241.130.127
Admin status = Enabled, Operational status = Discovery,
Weight = 1, Availability (%) =
page 20-38
Specifies the name of the SLB cluster.
Displays SLB statistics for the specified cluster.
: 128.241.130.204,
: L3
: Enabled,
: In Service,
= 60,
= 3000,
= 3,
= None,
= 25346,
= 3
0
0
0
Server Load Balancing Commands
OmniSwitch CLI Reference Guide
March 2011