Quick Steps For Configuring A Qos Policy Condition Cluster - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Configuring Server Load Balancing

Quick Steps for Configuring a QoS Policy Condition Cluster

Follow the steps below for a quick tutorial on how to configure a QoS policy condition cluster:
1
Create the QoS policy condition that will classify traffic for the SLB cluster. For example:
-> policy network group SOURCE 100.0.0.1 100.0.0.2 100.0.0.3 100.0.0.4
-> policy condition c1 source network group SOURCE destination tcp port 80
-> qos apply
2
Configure the SLB cluster using the
For example:
-> ip slb cluster Intranet condition c1
3
Assign physical servers to the SLB condition cluster with the
example:
-> ip slb server ip 103.10.50.1 cluster Intranet
-> ip slb server ip 103.10.50.2 cluster Intranet
-> ip slb server ip 103.10.50.3 cluster Intranet admin status disable
As an option, you can verify your SLB settings by entering
the SLB cluster. For example:
-> show ip slb cluster slb1
Cluster slb1
Condition
Type
Admin status
Operational status
Ping period (seconds)
Ping timeout (milliseconds)
Ping retries
Probe
Number of packets
Number of servers
Server 103.10.50.1
Admin status = Enabled, Operational status = In Service,
Availability (%) = 100
Server 103.10.50.2
Admin status = Enabled, Operational status = In Service,
Availability (%) =
Server 103.10.50.3
Admin status = Enabled, Operational status = Disabled,
Availability (%) = 0
As an option, you can also display traffic statistics for an SLB condition cluster by entering
cluster followed by the cluster name and the statistics parameter. For example, the following command
displays the packet count for traffic that is classified for the "Intranet" cluster:
OmniSwitch 6800/6850/9000 Network Configuration Guide
Quick Steps for Configuring Server Load Balancing (SLB)
ip slb cluster command with the condition parameter.
show ip slb cluster
: c1,
: L3,
: Enabled,
: In Service,
= 60,
= 3000,
= 3,
= None,
= 10000,
= 2
99
March 2008
ip slb server ip cluster command. For
followed by the name of
show ip slb
page 34-5