Server Load Balancing Commands
show ip slb probes
Displays the configuration of Server Load Balancing (SLB) probes.
show ip slb probes [probe_name]
Syntax Definitions
probe_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify the name of an SLB probe then all SLB probes are displayed.
Examples
No probe name is specified:
-> show ip slb probes
Probe Name
-----------------------+-------+-------+--------+------
web_server
mail_server
mis_servers
Output fields are described here:
output definitions
Probe Name
Period
Retries
Timeout
Method
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) probe.
Period
Retries Timeout Method
60000
3
12000
60000
3
3600000
5
24000
The user-specified name of the probe.
The period (in seconds) to check the health of servers.
The number of probe retries before deciding that a server is out of
service.
The timeout (in seconds) used to wait for probe answers.
The type of probe.
March 2011
HTTP
3000
SMTP
Ping
show ip slb probes
page 20-47