Policy Condition Source Vlan - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

QoS Policy Commands

policy condition source vlan

Configures a source VLAN for a policy condition.
policy condition condition_name source vlan vlan_id
policy condition condition_name no source vlan
Syntax Definitions
condition_name
vlan_id
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of the command to remove a source VLAN from a policy condition; however, at least
one classification parameter must be associated with a condition.
•
The source vlan policy condition classifies double-tagged traffic (for example, VLAN Stacking pack-
ets) based on the value of the outer VLAN tag of the packet.
Examples
-> policy condition cond5 source vlan 3
Release History
Release 6.6.1; command was introduced.
Related Commands
qos apply
policy condition
show policy condition
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionSourceVlan
OmniSwitch CLI Reference Guide
The name of the condition. May be an existing condition name or a new
condition.
The source VLAN ID for the flow.
Applies configured QoS and policy settings to the current configuration.
Creates a policy condition.
Shows information about policy conditions configured on the switch.
November 2009 page 39-95