Bridge - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
bridge
Syntax
Release Information
Description
Options
Mode
310
[ no ] bridge bridgeGroupName
Command introduced before JunosE Release 7.1.0.
Creates a bridge group to use for transparent bridging. A bridge group is a named collection
of network interfaces (ports) on an E Series router that forms a broadcast domain. Each
bridge group has its own set of forwarding tables and filters and, as such, functions as a
logical bridging device. The no version removes the bridge group configuration from the
router.
To configure an existing bridge group as a VPLS instance, you must use the bridge vpls
transport-virtual-router command.
NOTE: Do not assign the bridge group the same name as an existing virtual router
configured on the router.
bridgeGroupName—Name of the bridge group; string of up to 32 alphanumeric
characters
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
