Vlan Configuration Commands; Description; Display Interface Vlan-Interface - 3Com 5500G-EI Command Reference Manual

80 C 3: U
HAPTER SING
VLAN Configuration
Commands

description

display interface
VLAN-interface
VLAN C
OMMANDS
This section describes the commands you can use to configure and manage the
VLANs and VLAN interfaces on your system.
Syntax
string
description
undo description
View
VLAN view
Parameter
Enter a description of the current VLAN, up to a maximum of 32
string:
characters. For a description of a VLAN interface, the maximum is 80 characters.
Description
Use the description command to set a description for the current VLAN. Use the
undo description
The default description character string of the current VLAN is
The default description character string of the VLAN interface is the interface
name, for example,
Related command:
Example
To give VLAN1 the description "RESEARCH", enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]vlan 1
[SW5500-vlan1]description RESEARCH
Syntax

display interface vlan-interface [

View
All views
Parameter
Enter the ID number of the VLAN interface, ranging from 1 to 4094.
vlan_id:
Description
Use the
display interface vlan-interface
about a specific VLAN interface, or all VLAN interfaces. The information displayed
includes:
Current status of the interface
■
Current status of the line protocol
■
command to cancel the description of current VLAN.
.
vlan-interface1
.
display vlan
no description!
vlan_id
]
command to view the information
.