System Adjustment - Thermo Scientific A 40B Manual

Section 4 Operation
System - Adjustment

System Adjustment

level sensor and energy saving settings.
1. Use the arrow buttons to highlight
SP1
Editor
Settings
System
Installation
Adjustment
3. With
to display the options.
Control Type
Pump Adjustment
Level Sensor Settings
Energy Saving
Menu
Control Type
Pump Adjustment
Level Sensor Settings
Energy Saving
Menu
Control Type
Pump Adjustment
Level Sensor Settings
Energy Saving
Menu
Highlight the desired level to change the setting. Use
Lev2
cannot be changed. Use
4-16
is used to view/adjust the thermostat's control type, the pump speed and the
System
Menu
highlighted, press
LEV1
to select and enable the low level warning. See Section 6.
2. Press to display the submenu.
.
Adjustment
Calibration
Interfaces
4. Highlight the desired control option and press
to enable it.
Internal Control
External Control
Steaq Control
Follow Up Control
Stage 1 (LOW)
Stage 2 (MEDIUM)
Stage 3 (HIGH)
Lev3: NORMAL
Lev2: NORMAL
Lev1: NORMAL
Lev3
to select and enable the high level warning.
Menu
Menu
Menu
Menu
Thermo Scientific