GE Senographe DS Manual page 63

GE Healthcare
Revision 1
4 COMPONENT FW/SW TO ADS VERSION COMPATIBILITY MATRIX
The components in the Senographe system must have a certain version of firmware or software in order
to work correctly at a particular system level. The following table defines the compatibility matrix between
the software/firmware version required for each of these components for each system level.
Component
ADS Hardware Computer
Detector Type
IDC Hardware Computer
ADS Software Kit
IDC Software Kit
Generator CPU Board
Gantry CPU Board
(Poseidon)
Interface Board
Rotation Board
Lift Board
Compression Board
Tilt Board
Collimator
PDU Board
Bucky Board
Gantry CD-ROM to use to get
required system level
*- With the complete rollout of FMI12075, all systems in the field are at least at an IS4-3 system level.
** - Systems that received FMI12075 have NSC.1.1.7 and IS4-3 Forward Production systems will have
NSC.1.1.8. You must use Gantry CD-ROM to ensure that the Gantry CPU Board is at NSC.1.1.8.
*** - Systems that received FMI12075 may have Lift CPLD 5.0.1 and IS4-3 Forward Production systems will
have Lift CPLD 10.0.1.
**** - Systems that received FMI12075 may have PDU HC12 4.0.7 and IS4-3 Forward Production systems will
have PDU HC12 5.0.7.
***** - IDC Software 10.0.5 introduced at Penduick must only be used on the Dione 5 form factor IDC. When
changing an IDC on a pre-Penduick IB system, if no more Dione 4 IDCs exist you will receive a Dione 5 IDC on
which you must install IDC SW 10.0.5.
Product-historyDS.fm
TABLE 1 - COMPONENT FW/SW COMPATIBILITY MATRIX
(2383168-5
and lower*)
SB150 or U20
SFOV1 or
SFOV2
Dione 4
53.10.1 (U20)
43.10.1 (SB150)
4.2.6 *****
(DMR)
NSC.1.1.7 or
NSC.1.1.8 **
FPGA 4A
CPLD
DSP
HC12
CPLD 5.0.1 or 10.0.1***
DSP
HC12
CPLD
HC12
CPLD
HC12
DSP Rev1026
HC12 4.0.7 or 5.0.7 ****
CPLD
HC12
5174994-7
Service Information and Procedures Class A 2385072-16-8EN
System Level (Model Number)
IS4-3 Orion1
Nephtys
M412s1
Nephtys M413
(2383168-6)
U20
SFOV1 or
SFOV2
Dione 4
53.10.10
4.2.6 *****
1.10 3.02
NSC.1.2.5
FPGA 4A
5.1.2 5.1.2
5.13.5 5.13.5
5.9.4 5.9.4
10.0.1
5.6.3 5.6.3
5.10.2 5.15.2
5.1.4 5.1.4
5.7.1 5.7.1
5.1.5 5.1.5
5.4.0 5.4.0
Rev1026
5.0.7
5.0.3 5.0.3
5.4.6 5.4.6
5174994-9
Page no. 63
Senographe DS
Product history and compatibility
Penduick Z400
(2383168-7) (2383168-8)
U20 Z400
SFOV1 or SFOV1 or
SFOV2 SFOV2
Dione 5 Dione 5
53.40 54.10
10.0.5 10.0.5
4.02 4.02
NSC.1.2.15 NSC.1.2.15
FPGA 4A FPGA 4A
5.1.2 5.1.2
5.13.5 5.13.5
5.12.4 5.12.4
10.0.1 10.0.1
5.6.3 5.6.3
5.16.2 5.16.2
5.1.4 5.1.4
5.12.1 5.12.1
5.1.5 5.1.5
5.4.0 5.4.0
Rev1026 Rev1026
5.0.7 5.0.7
5.0.3 5.0.3
5.4.6 5.4.6
5174994-11 5174994-11
Chapter 3