Table of Contents
Advertisement
GE Healthcare
Revision 1
Job Card CHK A011 - Check kVp settings
8
PROCEDURE - RADCAL 4083 KVP METER
8-1
kVp meter calibration
•
Note the meter identification number and date of most recent calibration:
8-2
Position the meter
1. Ensure that the Radiation Protection Plate is 155 mm (6.10 inches) below the bottom of the Tube
Head.
2. Use the Senographe light centering device to center the kV peak meter target within the X-ray zone.
Chapter 9
Service Information and Procedures Class A 2385072-16-8EN
kVp meter
identification number
Date of calibration:
(dd/mm/yy)
Page no. 1750
Senographe DS
JC-CHK-A-011.fm
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Senographe DS and is the answer not in the manual?
Questions and answers
G.E.Essential l have recently bought What is the full weight.of the mamo Full weight of the console and other İtem's also measurements of each item with the main machine please All this Shipping Company required
The GE Senographe DS mammography machine is shipped in three crates with the following dimensions and weights:
- Crate 1 (Gantry, Generator Cabinet, and ramp):
- Dimensions: 2066 mm (81.34 in) depth × 848 mm (33.39 in) width × 2292 mm (90.24 in) height
- Mass: 641 kg (1410.2 lbs)
- Crate 2 (Control Station):
- Dimensions: 1110 mm (43.70 in) depth × 770 mm (30.31 in) width × 1850 mm (72.83 in) height
- Mass: 210.5 kg (464.07 lbs) for truck transport (without side covers and lid)
- Mass: 223.5 kg (492.73 lbs) for plane/boat transport (with side covers and lid)
- Crate 3 (Detector):
- Dimensions: 872 mm (34.33 in) depth × 2270 mm (89.37 in) width × 260 mm (10.24 in) height
- Mass: 104.4 kg (229.68 lbs)
### Total Mass:
- For truck transport: 641 + 210.5 + 104.4 = 955.9 kg (2104.95 lbs)
- For plane/boat transport: 641 + 223.5 + 104.4 = 968.9 kg (2133.61 lbs)
These values include the gantry, generator cabinet, control station, detector, and all related components.
This answer is automatically generated