07/11/02 09:11:54 61TA0000_110_0223
Injector Replacement
1. Relieve the fuel pressure (see page 11-358).
2. Remove the engine cover.
3. Disconnect the quick-connect fitting (A).
*01
4. Disconnect the connectors (B) and the engine mount control solenoid valve connector (C).
5. Remove the ground cable bolts (G101 and G102) (D).
6. Remove the fuel rail mounting nuts (E) from the fuel rail (F).
7. Remove the fuel rail and the injectors from the injector base.
8. Remove the injector clips (G) from the fuel rail.
9. Remove the injectors from the fuel rail.
TA08AE4A20326934595KBAT00
F
B
C
E
D
A
G
(cont'd)
11-223