Honda Accord 2008 Manual page 472

07/11/02 09:05:55 61TA0000_110_0153
28. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P07 20 indicated?
YES − Check for poor connections or loose
terminals at the output shaft (countershaft) speed
sensor and the ECM. If the ECM was updated,
substitute a known-good ECM (see page 11-7), then
go to step 27. If the ECM was substituted, go to step
1.
NO − Go to step 29.
29. Monitor the OBD STATUS for DTC P0720 in the
DTCs MENU with the HDS.
Does the screen indicate PASSED?
YES − If the ECM was updated, troubleshooting is
complete. If the ECM was substituted, replace the
original ECM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 28,
go to the indicated DTC's troubleshooting.
NO − If the screen indicates FAILED, check for poor
connections or loose terminals at the output shaft
(countershaft) speed sensor and the ECM. If the
ECM was updated, substitute a known-good ECM
(see page 11-7), then go to step 27. If the ECM was
substituted, go to step 1. If the screen indicates
NOT COMPLETED, go to step 27.
11-153